The Waltec brand has been around for decades, and many homeowners have older Waltec shower systems that are still working just fine. However, over time, the cartridge that controls the hot and cold water flow can become worn or damaged, which can result in a lack of hot water. Fortunately, changing the cartridge is a fairly straightforward process that can often be done by homeowners themselves.
If you have an older Waltec shower and you’re experiencing a lack of hot water, it’s a good idea to start by inspecting the cartridge. This small part is responsible for controlling the flow of water through the shower, and if it’s worn or damaged, it can cause a variety of issues.
To begin, turn off the water supply to the shower. This is usually done by turning a valve under the sink, or shutting off the main water supply to the house. Next, remove the decorative cap from the front of the shower handle. This will often reveal a screw that holds the handle in place. Use a screwdriver to remove the screw, then gently pull the handle off the wall.
Behind the handle, you should see the cartridge assembly. This will typically have a retaining nut that holds it in place. Use a pair of pliers to remove the nut, then carefully remove the cartridge from the assembly.
Once the old cartridge is out, it’s time to install a new one. Make sure you purchase the correct cartridge for your specific Waltec shower model. Then, simply slide the new cartridge into place and reattach the retaining nut. Replace the handle and screw, then put the decorative cap back on, and turn the water supply back on.
In most cases, simply changing the cartridge will solve the lack of hot water issue in an older Waltec shower. However, if you’re still experiencing problems after changing the cartridge, it could be a sign of a more serious issue. In these cases, it’s best to call in a professional plumber to take a look.
At Ace Plumbing Repair, we specialize in all types of plumbing repair services, including shower repairs. Our team of experienced plumbers can quickly diagnose and fix any issues you’re experiencing with your shower, ensuring that you have hot water when you need it.
In addition to shower repairs, we also offer a wide range of plumbing services to our customers. Whether you need a water heater replaced, a leaky faucet repaired, or a drain clog cleared, we’re here to help. We pride ourselves on providing high-quality services at affordable prices, and we always stand behind our work.
So if you’re experiencing issues with your old Waltec shower, don’t hesitate to give us a call at (844) 711-1590. Our team of plumbing experts is standing by and ready to assist you with all your plumbing needs. And with our commitment to quality and customer service, you can rest assured that you’re in good hands with Ace Plumbing Repair.
Call Now