by Brandon | Apr 5, 2023 | Uncategorized
Check Valve Not Sealing?
As a homeowner, you know that plumbing issues can be both frustrating and expensive. One of the most common problems you may encounter is a check valve that won’t seal properly. A check valve is essential in preventing the backflow of water, sewage, or other materials from entering your home. When it malfunctions, it can lead to significant plumbing issues, such as contaminated water, overflowing toilets, and flooded basements.
In this post, we’ll discuss the signs of a faulty check valve, the possible reasons why it won’t seal, and what you can do to fix the issue.
What is a Check Valve?
A check valve, also known as a one-way valve or non-return valve, is a device that allows fluid (water, sewage, gas, or oil) to flow in one direction while preventing it from flowing in the opposite direction. It is commonly used in plumbing systems to protect against backflow, which can cause contamination or damage to your pipes.
Signs of a Faulty Check Valve
The following are some common signs that your check valve is not sealing correctly:
1. Loud banging or knocking noise when the water runs. This could be a sign that the valve is closing too quickly or slamming shut.
2. Water is backing up into your home or overflowing from your toilet or sink. This could indicate that the valve is not closing tightly enough, allowing water to flow back into your home.
3. A reduction in water pressure. When the valve is not working correctly, it can cause a drop in water pressure.
4. Water quality has changed. If the quality of your water has changed, it could be an indication that contaminated water is flowing back into your pipes.
Reasons why a Check Valve Won’t Seal
A check valve not sealing properly is a common plumbing problem. Here are some reasons why it may be happening:
1. Age: Check valves wear out over time, and the seals can start to crack or break.
2. Debris: Smoke, dirt, and other debris can accumulate on the valve’s seals and prevent it from closing tightly.
3. Incorrect Installation: If the valve was not installed correctly, it may not be able to seal correctly.
4. Corrosion: Corrosion can cause the valve to stick, preventing it from operating correctly.
5. High Water Pressure: High water pressure can cause the valve to close too quickly or slam shut, causing damage to the valve’s seals.
How to Fix a Check Valve That Won’t Seal
There are several ways to repair a check valve that is not sealing correctly, depending on the extent of the damage. Here are a few options:
1. Clean the Valve: If the valve is dirty or has debris accumulation, you can clean the seals with a soft cloth or replace them if necessary.
2. Replace the Seals: If the seals on your check valve are damaged, replace them with new ones.
3. Replace the Valve: If the valve is too damaged to repair, you may need to replace it entirely.
4. Lower Water Pressure: If high water pressure is causing the valve to fail, you can install a pressure reducing valve to lower the water pressure.
Conclusion
If your check valve is not sealing properly, it is essential to address the issue as soon as possible to prevent any potential plumbing disasters. The common signs of a malfunctioning check valve include loud banging or knocking noise when water runs, water backing up into your home, a reduction in water pressure, and changes in water quality. The possible reasons why your check valve won’t seal properly include age, debris, incorrect installation, corrosion, and high water pressure.
When addressing these problems, you can choose to clean the valve, replace the seals, or replace the entire valve if necessary. Lowering the water pressure is also an option to prevent the valve from failing in the first place.
If you need expert help in resolving a check valve issue or any other plumbing problem, turn to Ace Plumbing Repair. Our expert plumbers can help you solve any issues quickly and efficiently, providing you with the best solutions to keep your home’s plumbing running smoothly. Contact us today at (844) 711-1590 or visit our website at aceplumbingrepair.com.
by Brandon | Apr 5, 2023 | Uncategorized
As a plumbing services company, our job is to stay up-to-date with the latest products and innovations in the plumbing industry to provide our customers with the best possible service. That’s why we’re excited to announce the unveiling of Elco’s new CPD!
For the uninitiated, CPD stands for “condensate pump discharge.” A condensate pump is used in HVAC systems to discharge water that has accumulated from condensation on the evaporator coil, which is then pumped out of the system to prevent damage.
Elco, a leading manufacturer of condensate pumps, has been hard at work developing a new CPD that promises improved efficiency, durability, and ease of use. In this article, we’re going to take a closer look at Elco’s new CPD and see what it has to offer.
Improved Efficiency
One of the main talking points for Elco’s new CPD is its improved efficiency. With an optimized design and the inclusion of the latest technology, Elco’s new CPD is said to be more efficient than its predecessors, allowing HVAC systems to operate at their best while saving on energy costs.
This improved efficiency is achieved through a number of innovative features. Firstly, Elco’s new CPD is equipped with a high-performance motor that uses less energy than previous models while still providing the same level of performance. Secondly, the pump’s impeller is designed to reduce the “dead zones” where pressure is low, leading to a significant increase in water discharge.
Lastly, the design of the pump allows for increased airflow which reduces the risk of clogs forming within the system. This translates to less maintenance and fewer callbacks, saving everyone time and money.
Durability
When it comes to HVAC systems, durability is paramount. HVAC systems are often exposed to harsh weather conditions and high usage rates; therefore, it is essential to have a condensate pump that can withstand these conditions.
Elco’s new CPD boasts an updated design that includes robust materials and construction, which makes it more durable than previous models. It is resistant to mechanical stress, UV radiation, and high temperatures from outdoor installations, allowing it to continue working long after other pumps would have failed.
Ease of Use
A condensate pump that is easy to install and use is always going to be attractive to HVAC contractors. That’s why Elco’s new CPD has been designed with ease of use in mind. During installation, its compact design means it can be installed in tight spaces. In addition, the new pump’s design improves visibility during installation, which reduces the chance of mistakes.
Perhaps the best feature of Elco’s new CPD is its self-priming capability. This means the pump is capable of priming itself, which saves time and reduces the risk of airlocks developing in the system. The pump’s large volume inlet also allows it to handle the water flow of a variety of HVAC systems, which makes it a versatile addition to any contractor’s installation kit.
Conclusion
At Ace Plumbing Services, we’re always on the lookout for products and innovations that can help us provide the best possible service to our customers. And from what we’ve seen, Elco’s new CPD certainly ticks all the boxes.
The improved efficiency, durability, and ease of use makes it an attractive option for HVAC contractors looking for a reliable, long-lasting condensate pump. We’re excited to see what else Elco has in store for the future of plumbing and HVAC, and we can’t wait to get our hands on this new pump to help our customers get the best out of their HVAC systems. For now, we encourage you to visit our website at aceplumbingrepair.com or give us a call at (844) 711-1590 for all your plumbing needs.
by Brandon | Apr 5, 2023 | Uncategorized
Over 500 sign up to Stiebel Eltron’s training courses
Stiebel Eltron is one of the leading manufacturers of highly reliable and efficient water heating systems, all of which come with an extended guarantee period. The company has been providing world-class training courses to plumbers from all over the world, which are designed to help them understand how to properly install and maintain Stiebel Eltron’s water heating systems.
Recently, the company announced that over 500 plumbers had signed up for their latest training courses, which shows that there is a growing demand for specialized training in the plumbing industry. Stiebel Eltron’s training courses are known for being both informative and engaging, and they have become highly sought after by the most discerning plumbing professionals.
Stiebel Eltron’s training courses are designed to provide plumbers with the knowledge they need to install and maintain their water heaters effectively. The company’s instructors use a range of teaching techniques to make sure that all participants understand the material. They also offer hands-on training sessions that allow plumbers to practice and refine their skills.
The popularity of Stiebel Eltron’s training courses highlights the importance of ongoing education for plumbing professionals. Whether a plumber is just starting their career or has been in the industry for decades, there is always something new to learn. By providing ongoing training opportunities, companies like Stiebel Eltron can help plumbers stay up-to-date with the latest techniques, technologies, and safety procedures.
Stiebel Eltron’s water heating systems are regarded as some of the most reliable and efficient available on the market today. However, at the end of the day, a water heater is only as good as the installation and maintenance it receives. That is why it is essential to have a qualified plumbing professional install, maintain, and repair your Stiebel Eltron water heating system. With the right knowledge and skills, a plumber can ensure that your water heater works optimally for years to come, providing you with an endless supply of hot water whenever you need it.
Plumbers who invest in ongoing training courses like those provided by Stiebel Eltron are more likely to have the skills required to install and maintain a wide range of water heating systems, not just those produced by Stiebel Eltron. Such skills are essential for keeping up the demand for plumbing services, especially as new water heating technologies and systems continue to emerge.
In conclusion, the high level of interest in Stiebel Eltron’s training courses reflects the growing demand for specialized plumbing training in the industry. By investing in professional development opportunities like these, plumbers can stay ahead of the curve, keeping their skills and knowledge up-to-date with the latest industry trends and best practices.
If you are looking for reliable and efficient water heating systems, make sure to choose a company like Stiebel Eltron. And, when it comes to installation and maintenance, always ensure that you are working with a qualified plumbing professional. The best plumbers are those who have invested in their own education and training, and who genuinely care about providing their clients with high-quality, reliable service.
by Brandon | Apr 5, 2023 | Uncategorized
As an SEO copywriting expert, I am specialized in ranking blog posts on the front page of Google. I have been tasked with writing daily blog posts with accompanying titles and meta descriptions that will rank keywords within the next six months. Today, I am writing about a popular plumbing topic of 2022 – Water Heater Repair and Maintenance Tips.
Water Heater Repair and Maintenance Tips
Water heaters are essential appliances in any household. They provide hot water for showers, washing dishes, and laundry. A water heater can last for years if it’s regularly maintained and repaired. Here are some water heater repair and maintenance tips to extend the life of your water heater.
1. Check the temperature
A water heater should have a temperature between 120 and 130 degrees Fahrenheit. If it’s too hot, it can cause burn injuries. If it’s not hot enough, it may not provide enough hot water. Check the temperature regularly and adjust it accordingly.
2. Replace the valve
The pressure relief valve is a safety feature that releases pressure if it’s too high. This valve can malfunction over time and should be replaced every three to five years to ensure safety.
3. Drain the tank
Sediments can form at the bottom of the tank, which can reduce the efficiency of the water heater. Drain the tank every six months to remove this sediment.
4. Inspect the anode rod
The anode rod is a metal rod that’s in the water heater’s tank that prevents the tank from rusting. It takes a lot of punishment over time, and once it breaks down, the tank will start to rust. Inspect it annually and replace it if it’s degraded.
5. Test the TPR valve
The temperature and pressure relief (TPR) valve is a critical safety device that protects the tank from high pressure and temperatures. Test it regularly to ensure it’s working correctly.
6. Inspect the gas line (if applicable)
If you have a gas water heater, inspect the gas line for leaks and make sure the connection to the water heater is secure.
7. Install a water softener
Hard water can cause minerals to build up in the tank, which can shorten the water heater’s life span. Install a water softener to prevent mineral buildup.
8. Ensure proper ventilation
Gas water heaters require proper ventilation to prevent carbon monoxide poisoning. An improperly ventilated gas water heater can be dangerous.
Conclusion
Regular maintenance and repair can extend the life of your water heater significantly. By following these water heater repair and maintenance tips, you’ll keep your water heater running smoothly and safely. Remember to check the temperature, replace the valve, drain the tank, inspect the anode rod, test the TPR valve, inspect the gas line (if applicable), install a water softener, and ensure proper ventilation.
If you encounter any issues with your water heater, don’t hesitate to call us at Ace Plumbing Repair at (844) 711-1590. We have certified plumbers and offer 24-hour plumbing services near you. Our team of professional plumbers can diagnose and fix any issues. Visit our website at aceplumbingrepair.com for more information about our services.
by Brandon | Apr 5, 2023 | Uncategorized
As a plumbing company, it’s important to stay up to date on the latest tools and technology to offer the best services to clients. One such tool that has proven to be incredibly useful for plumbers is the root cutter. In this article, we will explore what a root cutter is, how it works, and how it can benefit your plumbing company.
What is a Root Cutter?
A root cutter is a powerful cutting tool that is specifically designed for removing tree roots from pipes. This tool is typically attached to the end of a plumbing snake or an auger and is used to cut through obstructions in pipes that can’t be cleared with other tools. The blade of the root cutter is made from a durable material that can cut through tough materials like roots, rocks, and soil.
How does it work?
The root cutter works by using a rotating blade to cut through tree roots and other obstructions in pipes. The blade is attached to the end of a flexible cable that can navigate the twists and turns of plumbing pipes. When the blade encounters a root or other obstruction, it cuts through it, allowing the debris to be flushed out of the pipe.
Why is a Root Cutter Essential for Your Plumbing Company?
A root cutter is an essential tool for any plumbing company that deals with tree roots invading plumbing systems. Here are some of the benefits of using a root cutter:
1. Saves Time and Money
Removing tree roots from pipes can be a time-consuming and costly process. Traditional methods like digging up pipes and replacing them can take days and be quite expensive. With a root cutter, you can clear roots quickly and efficiently, saving time and reducing costs.
2. Prevents Future Blockages
When tree roots invade pipes, they continue to grow and can cause more damage over time. By using a root cutter to clear the roots, you can prevent future blockages and damage to the pipes.
3. Minimizes Damage
Removing tree roots from pipes can be a delicate process, and traditional methods can cause damage to the pipes, leading to more costly repairs. With a root cutter, you can remove the roots without causing damage to the pipes, minimizing the need for additional repairs.
4. Offers Versatility
Root cutters can be used on a wide range of pipes, including clay, concrete, and PVC. This versatility makes them a valuable tool for any plumbing company that deals with a variety of pipe materials.
Conclusion
In conclusion, a root cutter is an essential tool for any plumbing company that deals with tree roots invading plumbing systems. It offers a cost-effective, efficient, and versatile solution to tree root problems that can cause significant damage to plumbing systems. If you’re looking for a way to improve your plumbing services and better serve your clients, investing in a root cutter is a wise decision. For more information on how our plumbing experts can assist with your root cutting needs, visit our website at aceplumbingrepair.com or give us a call at (844) 711-1590.
by Brandon | Apr 5, 2023 | Uncategorized
As a plumbing services company, it’s important to establish a good relationship with your customers. Word of mouth can go a long way, especially when it comes to referrals. Unfortunately, it seems that not all tradespersons are treating their customers with the respect they deserve. According to recent research, four in ten UK adults have been “ghosted” by a tradesperson. Here’s what you need to know.
What is ghosting?
Ghosting is a term used when someone disappears or stops responding unexpectedly. It’s commonly associated with dating, but it can happen in other situations, including the trades sector. A tradesperson might “ghost” a customer if they don’t want to do a job anymore, if they’ve found a better-paying job, or if they’ve simply lost interest.
Why is ghosting a problem?
Ghosting is a problem because it’s unprofessional. If a customer hires a tradesperson to do a job, they expect that person to see the job through to completion. If the tradesperson disappears without a word, the customer is left in a difficult situation. They might have already paid a deposit, and they’ll need to find another tradesperson to take on the job, which can be costly and time-consuming.
Not only is ghosting unprofessional, but it’s also bad for business. If a customer is ghosted by a plumbing services company, they’re unlikely to recommend that company to their friends and family. And if they leave a negative review, it could damage the company’s reputation.
How can plumbing services companies avoid ghosting?
The best way to avoid ghosting is to be transparent from the start. When a customer contacts a plumbing services company, they should be given a detailed breakdown of the work that needs to be done and an estimate of how much it will cost. The tradesperson should also let the customer know when they’ll be available to start the job.
Once the job has started, the tradesperson should keep the customer informed of their progress. If there are any delays or changes to the schedule, the customer should be notified as soon as possible. And if the tradesperson decides they can’t complete the job, they should let the customer know and recommend another plumbing services company that might be able to help.
How can customers avoid being ghosted?
Unfortunately, there’s no guaranteed way to avoid being ghosted by a plumbing services company. However, there are a few things customers can do to increase their chances of finding a reliable tradesperson.
Firstly, they should do their research. They should look for plumbing services companies that have good reviews and a strong reputation in their local area. They should also ask for references from previous customers and check that the tradesperson is registered with a professional body, such as the Institute of Plumbing and Heating.
Secondly, customers should be clear about what they need. They should provide the tradesperson with as much information as possible about the job so that they can give an accurate estimate of how much it will cost and how long it will take. They should also ask for a written contract that specifies the scope of the work and the payment schedule.
Finally, customers should trust their instincts. If something feels off about a tradesperson, they should listen to their gut and look for someone else to do the job.
Conclusion
Ghosting is a problem that affects both plumbing services companies and their customers. Tradespersons who disappear without a word are unprofessional and damaging to their reputation. Customers who are ghosted are left in a difficult situation, and it can be costly and time-consuming to find another tradesperson to complete the job.
The key to avoiding ghosting is transparency from the start. Plumbing services companies should provide customers with a detailed breakdown of the work that needs to be done and keep them informed of their progress. Customers should do their research, be clear about what they need, and trust their instincts when choosing a tradesperson.
By working together, plumbing services companies and their customers can avoid the problem of ghosting and establish a strong, long-lasting relationship.
Call Now