by Brandon | May 12, 2023 | Maintenance, Repairs
The Waltec brand has been around for decades, and many homeowners have older Waltec shower systems that are still working just fine. However, over time, the cartridge that controls the hot and cold water flow can become worn or damaged, which can result in a lack of hot water. Fortunately, changing the cartridge is a fairly straightforward process that can often be done by homeowners themselves.
If you have an older Waltec shower and you’re experiencing a lack of hot water, it’s a good idea to start by inspecting the cartridge. This small part is responsible for controlling the flow of water through the shower, and if it’s worn or damaged, it can cause a variety of issues.
To begin, turn off the water supply to the shower. This is usually done by turning a valve under the sink, or shutting off the main water supply to the house. Next, remove the decorative cap from the front of the shower handle. This will often reveal a screw that holds the handle in place. Use a screwdriver to remove the screw, then gently pull the handle off the wall.
Behind the handle, you should see the cartridge assembly. This will typically have a retaining nut that holds it in place. Use a pair of pliers to remove the nut, then carefully remove the cartridge from the assembly.
Once the old cartridge is out, it’s time to install a new one. Make sure you purchase the correct cartridge for your specific Waltec shower model. Then, simply slide the new cartridge into place and reattach the retaining nut. Replace the handle and screw, then put the decorative cap back on, and turn the water supply back on.
In most cases, simply changing the cartridge will solve the lack of hot water issue in an older Waltec shower. However, if you’re still experiencing problems after changing the cartridge, it could be a sign of a more serious issue. In these cases, it’s best to call in a professional plumber to take a look.
At Ace Plumbing Repair, we specialize in all types of plumbing repair services, including shower repairs. Our team of experienced plumbers can quickly diagnose and fix any issues you’re experiencing with your shower, ensuring that you have hot water when you need it.
In addition to shower repairs, we also offer a wide range of plumbing services to our customers. Whether you need a water heater replaced, a leaky faucet repaired, or a drain clog cleared, we’re here to help. We pride ourselves on providing high-quality services at affordable prices, and we always stand behind our work.
So if you’re experiencing issues with your old Waltec shower, don’t hesitate to give us a call at (844) 711-1590. Our team of plumbing experts is standing by and ready to assist you with all your plumbing needs. And with our commitment to quality and customer service, you can rest assured that you’re in good hands with Ace Plumbing Repair.
by Brandon | May 10, 2023 | Maintenance, Repairs
If you have a septic tank system in your home, you may have plenty of questions about it. Here are some common septic tank FAQs answered:
1. How often should I get my septic tank cleaned out?
A septic tank should be cleaned out every 3-5 years. However, the frequency of cleaning may depend on the size of the tank and the number of people using it.
2. How do I know if my septic tank is full?
A septic tank is full when wastewater is draining slowly from your home’s sinks, showers, and toilets. You may also notice a bad odor near your septic tank or sewage backup in your home.
3. Can I use bleach or other strong chemicals in my septic tank?
No, strong chemicals like bleach, drain cleaners, or solvents should not be used in a septic tank. These chemicals can destroy the essential bacteria in the tank that break down solids.
4. What can I do to maintain my septic tank?
Routine maintenance like pumping out the tank every few years, avoiding flushing non-degradable items like diapers or hygiene products, and keeping chemicals out of the tank can help maintain a healthy septic system.
5. Can I drive or park on top of the septic tank?
No, it’s best to avoid driving or parking on top of the septic tank to prevent damage to the system. Heavy vehicles can compress the soil around the tank, which can lead to leaks.
6. Can I plant trees or shrubs near my septic tank?
It’s best to avoid planting trees or shrubs near a septic tank to prevent the roots from damaging the system. However, if you need to plant near the tank, consider shallow-rooted plants.
7. How do I know if my septic tank needs repair?
If you notice any signs of septic system issues, such as sewage backups, slow drainage, strong odor, or gurgling sounds from the pipes, you may need to have a professional inspect the system for damage.
8. Can I repair my septic system myself?
No, it’s always best to hire a professional septic system expert to diagnose and repair any issues with your system. Trying to fix a septic tank issue on your own can lead to costly damage and danger.
9. Do I need a permit to install a septic tank?
Yes, a permit from the local health department is required to install a septic tank system. A professional plumber or septic tank expert can help you obtain the necessary permits.
10. Can I add a garbage disposal to my septic tank system?
Adding a garbage disposal to your septic tank system can increase the amount of solid waste, leading to more frequent pumping and potential system failures. It’s recommended to avoid using a garbage disposal, although if you must, limit the amount of food waste and dispose of greases and oils in the trash.
In conclusion, septic tank systems are essential for people who live in areas without access to city sewerage systems. Regular maintenance, avoiding harmful chemicals, and using the system correctly can extend its lifespan and prevent costly breakdowns. If you’re experiencing any septic system issues, it’s best to call Ace Plumbing Repair at (844) 711-1590, a trusted and experienced plumbing company that provides exceptional customer service.
by Brandon | May 10, 2023 | Accessories, Maintenance, Repairs
Piping systems are essential in every residential, commercial, or industrial setting. In most cases, homeowners and property owners only respond to plumbing emergencies when they have already occurred. Instead of waiting until it’s too late, plumbing professionals recommend regular inspections of your plumbing system to identify any potential issues. One of the essential services provided by plumbing professionals is pipe patching. In this article, we will explore the ins and outs of pipe patching and why it’s essential for any property owner.
What is Pipe Patching?
Pipe patching is a plumbing service that involves sealing cracks and leaks within your piping system. In most cases, plumbers use a specialized resin material to seal leaks and cracks in pipes. This resin material is usually introduced into your pipes through the use of specialized equipment.
When Should You Consider Pipe Patching?
As a homeowner or property owner, you should always be on the lookout for plumbing emergencies. Below are some of the signs that you need to consider pipe patching urgently:
1. Constant leaks – If you notice constant leaks in your water or sewer system, you need to consider pipe patching. Continuous leaks could lead to water damage or even mold in your property.
2. Low water pressure – Low water pressure is another sign that you need to consider pipe patching. Low water pressure could be an indication of leaks within your piping systems.
3. Foul odors – Foul odors emanating from your sewage systems could be a sign that you need pipe patching. Typically, foul odors arise when there are cracks or leaks in your sewer systems.
Why Is Pipe Patching Essential?
1. Cost Saving – One of the primary advantages of pipe patching is that it’s cost-saving. Instead of completely replacing your pipes, pipe patching allows you to repair pipes at a fraction of the cost of replacement.
2. Time-Saving – Pipe patching is also time-saving. Instead of undertaking extensive repairs or replacements, pipe patching takes little time to complete, allowing you to go back to your routine activities.
3. Minimal Damage – Pipe patching causes minimal damage to your property. Unlike a full replacement that could require extensive digging, pipe patching requires minimal digging.
4. Improved Functionality – Pipe patching improves the functionality of your plumbing systems since it seals any leaks or cracks.
How Does Pipe Patching Work?
Pipe patching involves several steps. The first step involves inspecting your piping systems to determine the extent of damage or cracks. Once the extent of the damage is determined, the plumbers introduce the resin material into your pipes through specialized equipment.
The resin material then flows through your pipes and fills the leak or crack, sealing it. Once the material dries, it forms a solid lining within your pipes, which is usually stronger than the original piping material. After the lining has cured, the plumbers conduct a final inspection to ensure that the patching was successful.
Conclusion
Pipe patching is an essential plumbing service that homeowners and property owners should consider. With the advantages of cost-saving, time-saving, minimal damage, and improved functionality, pipe patching is an effective solution for the repair of cracks or leaks in your pipes. Ace Plumbing Repair provides exceptional pipe patching services for any plumbing emergencies that you may have. For more information about our services, please contact us at (844) 711-1590, or visit our website, aceplumbingrepair.com, today!
by Brandon | May 10, 2023 | Maintenance, Repairs
Plumbing issues can be a nightmare, especially when they catch us off guard. These problems can be expensive to fix and can even cause severe damage to your home. As a homeowner, you want to make sure that your plumbing system is in good working condition, which includes avoiding common plumbing mistakes. In this article, we’ll discuss several common plumbing mistakes and how to avoid them.
1. Ignoring Leaks
Ignoring a leak may seem like a small issue, but it can lead to significant problems. Leaks can damage your walls, floors, and other areas of your home. Additionally, leaks can lead to increased water bills and even mold growth. If you notice a leak, it’s essential to address it as soon as possible. Sometimes, a simple repair can solve the problem. However, more severe issues may require a professional plumber.
2. Using Chemical Drain Cleaners
Chemical drain cleaners are a quick solution for a clogged drain, but they can also be harmful to your pipes. These products contain harsh chemicals that can damage your pipes over time. Additionally, drain cleaners can’t always break down the entire blockage, leading to recurring clogs. The best solution is to use a drain snake or a plunger to clear the blockage. If the issue persists, it’s best to call a professional.
3. Overloading Garbage Disposals
Garbage disposals are a convenient appliance in the kitchen, but they are not indestructible. Overloading your garbage disposal can cause it to break down and clog your pipes. Additionally, it’s important to avoid putting certain items down the disposal, such as grease, potato peels, and fibrous foods. These items can damage the disposal and cause clogs in your pipes.
4. Flushing Inappropriate Items
Flushing inappropriate items down the toilet can lead to significant plumbing problems. Items such as wipes, feminine hygiene products, and dental floss can cause clogs in your pipes. Additionally, some of these items can damage your pipes and sewage lines. The only things that should be flushed down the toilet are human waste and toilet paper.
5. DIY Plumbing Repairs
DIY plumbing repairs may seem like a good idea, but they can lead to significant problems. If you don’t have the proper knowledge or equipment, you can cause more damage to your plumbing system. Additionally, if you accidentally break a pipe, it can lead to water damage and expensive repairs. It’s best to leave plumbing repairs to the professionals to avoid causing more harm than good.
6. Forgetting to Test Your Sump Pump
Your sump pump is responsible for keeping your basement or crawl space dry. However, if it fails to work properly, it can lead to flooding and water damage. To avoid this issue, it’s essential to test your sump pump regularly. Simply pour water into the sump pit to see if the pump turns on and moves the water out of your home.
7. Allowing Tree Roots to Grow in Your Sewer Lines
Tree roots are attracted to the water in your sewer lines, which can cause them to grow inside your pipes. These roots can lead to blockages and even pipe damage. It’s important to remove any trees or plants near your sewer line to avoid this issue. Additionally, it’s best to have a professional inspect your sewer line regularly to catch any potential problems early on.
In conclusion, these are some common plumbing mistakes that many homeowners make. However, by following these tips, you can avoid costly repairs and keep your plumbing system in good condition. If you encounter any severe plumbing issues, it’s best to contact a professional plumber to solve the problem. By taking care of your plumbing system, you can ensure the longevity and comfort of your home. Remember to keep Ace Plumbing Repair in mind for all your plumbing needs. Give us a call at (844) 711-1590 or visit our website, aceplumbingrepair.com, to schedule an appointment today.
Call Now