As a plumber, you know the importance of having the right tools in your arsenal. One of the essential tools you need is a tubing bender. When it comes to bending tubes for plumbing work, the Imperial 5/8″ tubing bender is a reliable and durable option.
In this article, we’ll take a closer look at the Imperial 5/8″ tubing bender and guide you through the proper ways of using it for your plumbing services.
Imperial 5/8″ Tubing Bender: An Overview
The Imperial 5/8″ tubing bender is a hand-held tool used to bend copper, brass, aluminum, and other thin-wall tubing. It consists of a bender head, handle, and two rollers that push against the tube to create bends of various angles.
What sets this tubing bender apart from other models is its ability to bend through tight spaces. With its compact and lightweight design, it can fit into hard-to-reach areas and produce precise bends without damaging the tube’s wall or structure.
Using an Imperial 5/8″ Tubing Bender for Plumbing Services
Step 1: Prepare the Tubing
Before you start bending, you need to prepare the tubing for the process. First, cut the tubing to the desired length using a tube cutter. Make sure that the tubing’s ends are clean and free of burrs or rough edges.
Step 2: Position the Tubing
Once the tubing is prepared, place it in the imperial 5/8″ tubing bender. The placement will depend on the type of bend you’re going to make. If you’re going to make a U-shape bend, place the tubing between the rollers with the desired bend area protruding from the bender head. Secure the tubing with your non-dominant hand while holding the tubing bender in your dominant hand.
Step 3: Begin Bending
With the tubing in place, gently push down on the tubing bender’s handle to initiate the bending process. Make sure to apply even pressure on both sides of the tubing using your fingers.
As you bend, check for signs of damage or kinks in the tubing. If you see any significant imperfections, discard the tubing and start over.
Step 4: Check for Accuracy
Once you’ve achieved the desired bend, check for accuracy using a protractor or a tubing bender guide. The Imperial 5/8″ tubing bender produces consistent and uniform bends, but it’s always a good idea to check for accuracy to ensure that the tubing fits precisely.
Step 5: Repeat
If you need to make additional bends, repeat the process by placing the tubing in the imperial 5/8″ tubing bender and following the steps above.
Tips for Using an Imperial 5/8″ Tubing Bender
1. Lubricate the rollers to prevent friction and reduce wear and tear.
2. Use the proper size tubing; otherwise, it will not fit in the tubing bender, and the resulting bend will not be accurate.
3. Experiment with different angles and positioning to create unique bends and shapes for your plumbing services.
4. Be patient and apply even pressure when bending the tubing. Rushing the process can lead to damage and suboptimal results.
Conclusion
The Imperial 5/8″ tubing bender is a valuable tool for any plumber who needs to bend tubing for their plumbing services. Following the proper steps and tips outlined above will ensure consistent and precise results, helping you deliver high-quality work for your clients.
Remember to always promote your services to your customers and encourage them to visit your website or give you a call if they need any plumbing assistance. Contact us at Ace Plumbing Repair for all your plumbing needs at (844) 711-1590.
Call Now